19 · Transmission

3.2. Re-assembling (page 5 of 5)

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Components internal to the gearbox

19 Gearbox3.2. Re-assembling · page 5 of 5

3.2. Re-assembling (page 5 of 5) – diagram from the 19 Gearbox chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.

Figure : B2CM047D

Remove :

The friction washer (8)
The sun wheel (9)

A top-down view of a planetary gear assembly showing a central sun gear surrounded by planet gears within a ring gear, with four roll pins indicated by callouts labeled 10. The assembly is mounted on a yellow-painted gearbox housing.

Figure : B2CM048D

Drive out the 4 roll pins (10).

‹ Prev Next › 4.2. Re-assembling

Parts & tools for this job For 2006 Fiat Ducato

TOOLTorque wrenchSearch: 3/8 inch torque wrench
TOOLSocket setSearch: socket set metric
BOOKHaynes manualSearch: Haynes manual Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.