Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)19 · 19 Gearbox
19 · Transmission

3. Gearbox control plate

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Components internal to the gearbox › 3. Gearbox control plate
19 Gearbox3. Gearbox control plate
A photograph showing two blue gearbox components side-by-side: on the left, a helical gear labeled with callout number 2, and on the right, a bearing assembly labeled with callout number 1.

Figure : B2CM040D

CAUTION : Fit the bearing the right way round : Open groove opposite the gears.

Refit; Using tool [8] and press :

  • The 6th gear pinion (2)
  • The 6th gear bearing (1)

N.B. : If the force required to fit the 5th and 6th gear pinions is less than 500 daN; Procedure for replacing parts.

3. Gearbox control plate

3.1. Stripping

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.