2. output shaft
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Components internal to the gearbox › 2. output shaft
19 Gearbox2. output shaft · page 1 of 3
2. output shaft
2.1. Stripping
![Diagram showing the removal of the 6th gear bearing and pinion from the output shaft using tools [5a] and [7].](/fiat/ducato-2006-2017/assets/page_2262_fig01.png)
Figure : B2CM03RD
Remove : Using tools [5a], [7] and press :
- The 6th gear bearing (1)
- The 6th gear pinion (2)
N.B. : If rust is present on removal between the shaft and the 5th and 6th speed gears, the shaft and the rusty gears must be replaced.
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Ducato
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.