1.2. Re-assembling (page 3 of 3)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Components internal to the gearbox
19 Gearbox1.2. Re-assembling · page 3 of 3
Figure : B2CM03PD
![Diagram showing bearing (2) being pressed onto a gear shaft using tools [5a] and [8]](/fiat/ducato-2006-2017/assets/page_2261_fig01.png)
Fit the bearing (2) (6th gear end); Using tools [5a], [8] and press.
Figure : B2CM03QD
![Diagram showing bearing (1) being pressed onto a gear shaft using tool [8]](/fiat/ducato-2006-2017/assets/page_2261_fig02.png)
Fit the bearing (1) 1st gear end); Using tool [8] and press.
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Ducato
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.