3.2. Re-assembling (page 2 of 5)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Components internal to the gearbox
19 Gearbox3.2. Re-assembling · page 2 of 5
3.2. Re-assembling (page 2 of 5) – diagram from the 19 Gearbox chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.
![Diagram showing a bearing (1) being removed from a gearbox component using tools [5a], [5b], and [11]](/fiat/ducato-2006-2017/assets/page_2270_fig01.png)
Figure : B2CM042D
Remove the bearing (1); Using the tools [5a], [5b], [11].
Figure : B2CM043D
Remove the speedometer drive gear (2).
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Ducato
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.