GRILLE (ONE) ON FRONT BUMPER - R.R

Operation 7055B08 · EXTERIOR PROTECTIONS

Removing

Op. 7210E10 R.R. FRONT BUMPER

- For the upper grille.

1. Place double-sided adhesive bodywork tape (1a) along the entire perimeter of the grille (1b).

2. Use a plastic spatula to remove the grille (2a), undoing retainers (2b) from inside the bumper.

- For the lower grille:

1. Place double-sided adhesive bodywork tape (1a) along the entire perimeter of the grille (1b).

2. Use a plastic spatula to remove the grille (2a), undoing retainers (2b) from inside the bumper.

Refitting

- Check that the grille is not damaged.

- Position the grille attaching the retainers.

- Remove the protective adhesive tape.

Op. 7210E10 R.R. FRONT BUMPER