Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)17 · Body fittings
17 · Body & interior

Left rear wheel arch liner - r.r

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Mouldings and protection › Left rear wheel arch liner - r.r
Body fittingsLeft rear wheel arch liner - r.r

LEFT REAR WHEEL ARCH LINER - R.R

Operation 7055B44 · EXTERIOR PROTECTIONS

Removing

- Position the vehicle on the lift and raise it.

1. Undo the bolts.

2. Undo the plastic nut.

3. Remove the wheel arch releasing it from its housing.

LEFT REAR WHEEL ARCH LINER - R.R

Refitting

- Check that the wheel arch is not damaged.

- Position the front wheelarch and secure with the bolts and plastic nut.

- Lower the vehicle and remove it from the lift.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.