Stripping bonnet lid

Make

Fiat

Model

Grande Punto Factory Service Manual

Year

2005–2012

Section

Stripping for replacement interventions › Stripping bonnet lid

Body panels and frameStripping bonnet lid

STRIPPING BONNET LID

Operation 7205E20 · EXTERIOR PARTS

NOTE: The operation should be carried out with the bonnet lid removed.

1. Remove the end stop pads.

- Remove both the decorative trims.

Op. 7025A23 DECORATIVE BONNET TRIM (ONE), LEFT OR RIGHT (WITH WINDSCREEN WASHER JETS) - R.R.

1. Remove the windscreen washer jet pipes.

2. Remove the pipe retainers by undoing the retainers fastening them to the bonnet.

3. Recover the three-way fitting by undoing the retainer.

4. Extract the mounting (4a) after having released the retainers (4b).

Op. 7025A22 SOUNDPROOFING LINING FOR BONNET LID - R+R

18 Body & interior