Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)18 · Body panels and frame
18 · Body & interior

Stripping rear bumper

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Stripping for replacement interventions › Stripping rear bumper
Body panels and frameStripping rear bumper

STRIPPING REAR BUMPER

Operation 7205E66 · EXTERIOR PARTS

The operation should be carried out with the bumper removed.

Op. 5580H06 WIRING FOR PARKING SENSOR SYSTEM - R.R

- Remove the four sensors

Op. 5580H36 PARKING SENSOR SYSTEM REAR SENSORS - R.R. WITH REAR BUMPER REMOVED

1. Undo the rear foglamp retaining bolt

STRIPPING REAR BUMPER

1. Release the tail-light tab (1a) from its seat (1b) on the bumpers and recover the tail-light (1c).

STRIPPING REAR BUMPER

1. Undo the reversing light retaining bolt

STRIPPING REAR BUMPER

1. Release the tail-light tab (1a) from its seat (1b) on the bumpers and recover the tail-light (1c).

STRIPPING REAR BUMPER

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.