FRONT BRAKE PADS - REPLACE

Operation 3310A60 · FRONT DISC BRAKES

Removing

The following procedure describes left front brake disc removal/refitting. Proceed in the same way for the right front brake disc.

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

Op. 4450B12 FRONT WHEELS (TWO) - R+R

1. Disconnect the electrical connection for the brake pad wear sensor.

2. Uncrew bolts (2a) securing brake caliper (2b) to the bracket and remove from its seat.

- Secure the brake caliper to the suspension spring.

1. Remove the front brake pads from the bracket.

Refitting

- Grease the brake caliper and bracket in the areas of the pad support surfaces.

- Place the front brake pads in their housings.

- Fit the brake caliper and tighten the bolts to the recommended torque.

- Connect the electrical connection to the brake pad wear sensor.

Op. 4450B12 FRONT WHEELS (TWO) - R+R

- Connect the negative battery terminal.

- Remove the vehicle from the lift.