12 · Brakes

Front brake caliper (one) - r.r

BrakesFront brake caliper (one) - r.r

FRONT BRAKE CALIPER (ONE) - R.R

Operation 3310A30 · FRONT DISC BRAKES

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

- Unscrew the engine oil reservoir plug and fit the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

1. Disconnect fitting (1a), remove clip (1b) and disconnect hose (1c).

1. Disconnect the electrical connection for the brake pad wear sensor.

	Description	Connector
1	Left brake pad wear sensor (switch)	See K020 LEFT BRAKE PAD WEAR SENSOR (SWITCH)

2. Undo the connector (2a) and remove the hose (2b) by releasing from fastening (2c).

3. Undo the bolts (3a) and remove the brake caliper (3b).

- Fit the brake caliper from its seat and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front brake calipers - bracket side	Bolt		2.7 ÷ 3.3

- Fit the rigid pipe and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Flexible pipe to front brakes - brake caliper side	Connector	M10	1.4 ÷ 1.8

- Connect the electrical connection for the brake pad wear sensor.

- Conect the hose, secure with the clips and tighten the fitting to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.