Left front wheel - r.r
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Hubs and wheels › Left front wheel - r.r
‹ Prev Rear wheel geometry - check using optical equipment, includes adjustment if necessaryNext › Right front wheel - r.r
Suspension and wheelsLeft front wheel - r.r
LEFT FRONT WHEEL - R.R
Removing
- Position the vehicle on a lift.
- Undo the bolts and remove the left front wheel.
Refitting
- Position the left front wheel in its housing and secure it tightening the new bolts to the recommended torque.
- The wheel studs used on this vehicle have M12 x 1.5 threads and can be identified by a groove in the centre of the head.
- The distance between the stud centre lines is 100 mm, use only the wheels specified for this vehicle.
- The use of other studs could irreparably damage the wheel hub threads and make it necessary to replace them.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Steel wheels | Wheel bolts | M12 x 1.5 | 10.8 ÷ 13.2 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Alloy wheels | Wheel bolts | M12 x 1.5 | 10.8 ÷ 13.2 |
- Remove the vehicle from the lift.
‹ Prev Rear wheel geometry - check using optical equipment, includes adjustment if necessaryNext › Right front wheel - r.r
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTFront wheel bearingSearch: Fiat Grande Punto 2005 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Fiat Grande Punto 2005 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.