Tpms system control unit r r
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Hubs and wheels › Tpms system control unit r r
‹ Prev Tyre inflation pressure sensor (one)Next › Front tyres pressure transmitter, (one) lh or rh - r r
Suspension and wheelsTpms system control unit r r
TPMS SYSTEM CONTROL UNIT R R
Removing
1. Undo the bolts securing the T.P.M.S. control unit to the right rear parcel shelf mounting bracket.
2. Remove the T.P.M.S. control unit and wiring.
3. Disconnect the electrical connection for the T.P.M.S. control unit.
| Description | Connector | |
|---|---|---|
| 3 | See M047 TYRE INFLATION PRESSURE CONTROL UNIT |
Refitting
- Connect the electrical connection for the T.P.M.S. control unit.
- Place the T.P.M.S. control unit and wiring in position.
- Tighten the bolts securing the T.P.M.S. control unit to the right rear parcel shelf mounting bracket.
‹ Prev Tyre inflation pressure sensor (one)Next › Front tyres pressure transmitter, (one) lh or rh - r r
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTWheel bearingSearch: Fiat Grande Punto 2005 wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Fiat Grande Punto 2005 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.