FRONT CROSSMEMBER WIRING - R.R

Operation 5505C10 · VEHICLE COMPARTMENT WIRING

Removing

See the Wiring Diagrams section for accurate identification of the electrical connections.

- Position the vehicle on a lift.

- Open the bonnet.

- Raise the vehicle.

Op. 7210E10 R.R. FRONT BUMPER

1. Disconnect all the electrical connections for the wiring.

2. Release the wiring from the retainers and remove it.

Refitting

- Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.

If necessary, carry out continuity tests.

- Position the wiring and secure it using the various retainers.

- Connect all the electrical connections for the wiring.

Op. 7210E10 R.R. FRONT BUMPER

- Lower the vehicle.

- Close the bonnet.

- Remove the vehicle from the lift.