CRUISE CONTROL OPERATION ROAD TEST

Check 5580AE

- Take the vehicle on the road under safe conditions and respecting the highway code.

- Turn on the CRUISE CONTROL system and set the ON/OFF switch on the CRUISE CONTROL stalk to ON

- Check the Cruise Control warning light comes on.

- Drive the vehicle at 50 or 70 km/h in 4th gear (according to the maximum speed limit on the road).

- Turn the wheel on the CRUISE CONTROL stalk towards SET + and release it immediately to store the speed reached.

- Remove your foot from the accelerator and check the vehicle maintains the set speed.

- Turn the wheel on the CRUISE CONTROL stalk toward the SET+ position and maintain the position to increase the speed to 70 or 90 km/h (according to maximum speed limit on the road).

Do not operate the accelerator.

- Release the control wheel and maintain the set speed for a few seconds.

- Press the BRAKE pedal and release immediately, then wait for the vehicle speed to drop to 50 or 70 km/h

Do not operate the clutch.

- Press and release the RECALL key on the end of the lever and check that the vehicle returns to the last speed value stored (70 or 90 km/h) according to the speed set previously.

Do not operate the accelerator.

- Press the CLUTCH pedal and release immediately, then wait for the vehicle speed to drop to 50 or 70 km/h

Do not operate the brake.

- Press and release the RECALL key on the end of the CRUISE CONTROL stalk and check that the vehicle returns to the last stored speed value (70 or 90 km/h, according to the level set previously).

Do not operate the accelerator.

- Turn the wheel on the CRUISE CONTROL stalk towards SET- to reduce vehicle speed to 50 or 70 km/h.

Do not operate the brake, clutch or accelerator pedals.

- Release the control wheel and maintain the set speed for a few seconds.

- Turn off the system by setting the ON/OFF switch on the CRUISE CONTROL stalk to OFF and check that the vehicle speed drops.

Do not operate the brake, clutch or accelerator pedals.