Catalytic converter heat shield - r.r
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Exhaust pipes and silencers › Catalytic converter heat shield - r.r
‹ Prev INTRODUCTION - EXHAUST PIPES AND SILENCERS - For versions with DPFNext › Heat shield for exhaust pipe on fuel tank - r.r
EngineCatalytic converter heat shield - r.r
CATALYTIC CONVERTER HEAT SHIELD - R.R
Removing
- Position the vehicle on a lift.
1. Unscrew the nuts and disconnect the catalytic converter from the front exhaust silencer section.
2. Undo the nuts (2a), toothed clips (2b) and remove the heat shield (2c).
Refitting
- Place the heat shield back in its housing and secure it using the bolts and clips.
- Connect the catalytic converter to the front exhaust silencer section and tighten the nuts to the specified torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Catalytic converter - front silencer side | Nut | M8 | 2.5 | 1.9 Multijet |
- Remove the vehicle from the lift.
‹ Prev INTRODUCTION - EXHAUST PIPES AND SILENCERS - For versions with DPFNext › Heat shield for exhaust pipe on fuel tank - r.r
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTExhaust gasketSearch: Fiat Grande Punto 2005 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.