Gearbox side rigid support reinforcement
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Power unit supports › Gearbox side rigid support reinforcement
GEARBOX SIDE RIGID SUPPORT REINFORCEMENT
Removing
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R
1. Undo bolt (1a) securing the gearbox side rigid mount reinforcement (1b) to the gearbox.
2. Unscrew nut (2a) securing the gearbox side rigid mount reinforcement (1b) to the power unit rigid mount and remove.
Refitting
- Refit the gearbox side rigid mount reinforcement in its seat and secure with the nut.
- Tighten the bolt securing the gearbox side rigid mount reinforcement to the gearbox.
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R
Removing
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R
1. Undo bolt (1a) securing the gearbox side rigid mount reinforcement (1b) to the gearbox.
2. Unscrew nut (2a) securing the gearbox side rigid mount reinforcement (1b) to the power unit rigid mount and remove.
Refitting
- Refit the gearbox side rigid mount reinforcement in its seat and secure with the nut.
- Tighten the bolt securing the gearbox side rigid mount reinforcement to the gearbox.
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.