Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)19 · Wiring diagrams and electrical functions
19 · Electrical

Boot opening - description

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Electrically activated devices › Boot opening - description
Wiring diagrams and electrical functionsBoot opening - description

BOOT OPENING - DESCRIPTION

DESCRIPTION

The boot opening geared motor is operated by:

- the remote control;

- the locking/unlocking button in the centre console.

Operation through the remote control takes place in two ways.

- indepedently of the doors: there is a special button on the remote control that allows the boot only to be "unlocked": the boot is released and lifts up slightly. The operation is signalled by the direction indicators flashing twice; when it is closed again the boot returns to the state prior to opening.

- together and at the same time as the unlocking of the doors: the tailgate is considered as a fifth door to all intents and purposes: for the control logic.

See E3040 CENTRAL LOCKING

One of the two modes described above can be selected using a special setup in the instrument panel.

The boot opening circuit is protected by a specific fuse, located in the Body Computer.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.