Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)19 · Wiring diagrams and electrical functions
19 · Electrical

Puddle lights - functional description

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Interior lighting › Puddle lights - functional description
Wiring diagrams and electrical functionsPuddle lights - functional description

PUDDLE LIGHTS - FUNCTIONAL DESCRIPTION

HIGH trim level

FUNCTIONAL DESCRIPTION

The Body Computer M1 receives door open input signals at pin 57 (driver''s front door) and 56 (passenger side door) of connector A of M1

Both puddle lights G51 and G52 are supplied by a line protected by fuse F53 located on Body Computer M1.

Lights G51 and G52 are supplied from Body Compuer M1, from pin 27 of connector E, while an analogue timed control signal is received from pins 2 and 4 of connector C.

Body Computer M1 - connector G - is supplied directly from the battery from a line protected by maxifuse F2 of engine compartment control unit B1. It is ignition-operated (INT) at pin 32 of connector D. Pin 10 of connector H of M1 supplies a reference earth to the Body Computer.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.