Tunnel trim - r r

Operation 7040L20 · Cabin floor covering

Removing

- 3380A44 handbrake/linkage protection - r+r

Move the front seat forward to the end of its travel.

1. Move panel (1a) by undoing retainers (1b) and then retainers (1c).

2. Disconnect the electrical connection.

3. Undo the rear bolts.

Move the front seat back to the end of its travel.

1. Undo the bolts.

2. Remove the trim.

Refitting

Check that the cover is undamaged.

Position the trim and tighten the front bolts.

Move the front seat forward to the end of its travel.

Tighten the rear bolts.

Connect the electrical connection.

Position the trim attaching the retainers.

- 3380A44 handbrake/linkage protection - r+r