Drivers seat manual height adjustment device - r r

Operation 7045A36 · Front seat assembly

Removing

Raise the set to the end of its travel using the adjustment lever.

- 7045A43 seat exterior guard - r r

1. Undo the bolts.

2. Released the toothed wheel (2a) from the toothed sector (2b) and remove the manual device (2c).

3. Keep the bush.

Refitting

Check that the manual device is not damaged.

Position the bush.

1. Fit the device in its seating. If the toothed wheel does not line up with the toothed sector, turn retaining plate (1a) as far as necessary by hand in relation to rotation plate (1b).

Tighten the bolts.

- 7045A43 seat exterior guard - r r

Test the operation of the manual seat height adjustment device.