Tailgate lock striker - r+r
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Tailgate/ › Tailgate lock striker - r+r
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Exterior handle or block support - r+r with panel/protection removed
Body fittingsTailgate lock striker - r+r
Tailgate lock striker - r+r
Removing
- 7040B22 luggage compartment/load platform moulding - r+r
1. Undo the bolts.
2. Remove the striker.
Refitting
Check that the striker is undamaged.
1. Position the striker and screw in the bolts without tightening them.
2. Adjust the striker position (2a). Tighten the bolts (2b). The arrows show the possible movements.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 2b | Bolt | TAIL-GATE LOCK STRIKER | M6 | 0.8 |
- 7040B22 luggage compartment/load platform moulding - r+r
Check that the tailgate opens and closes properly.
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Exterior handle or block support - r+r with panel/protection removed
Parts & tools for this job For 2003 Fiat Idea
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.