Lateral acceleration and yaw sensor r r

Operation 3350E30 · Vehicle direction control system vdc

Removing

Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

Proceed with removal - 3380A44 handbrake/linkage protection - r+r

Proceed with removal - 7040L20 tunnel trim - r r

1. Disconnect the electrical connection from the side acceleration and yaw sensor.

2. Undo the nuts (2a) and remove the side acceleration and yaw sensor (2b).

Refitting

Refit the side acceleration and yaw sensor and secure with the nuts.

Connect the electrical connection to the side acceleration and yaw sensor.

Proceed with refitting - 7040L20 tunnel trim - r r.

Proceed with refitting - 3380A44 handbrake/linkage protection - r+r.

Connect the negative (-) battery terminal.