Clutch pedal switch - r r

Operation 1060G42 · Pressure pump electric control

1.3 JTD 16v

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

Proceed with removal - 7040L37 gear lever plate - r r

Proceed with removal - 7040A65 passenger compartment box lock, one, r r

Proceed with removal - 7040A19 cushion padding - r r

Proceed with removal - 7040A28 TRIM on gearbox control panel - R.R.

Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R.

1. Undo the bolts (1a) and remove the lower reinforcement for the underdashboard crossmember (1b).

1. Disconnect the electrical connection from the clutch pedal switch.

2. Rotate the clutch pedal switch and remove it.

Refitting

Place the clutch pedal switch in its housing rotating it in a clockwise/anti-clockwise direction until the retainer tooth can be heard clicking into the seat on the braket.

Connect the electrical connection to the clutch pedal switch.

Place the lower reinforcement in its housing on the underdashboard crossmember and fasten it using the bolts.

Proceed with refitting - 7040A30 Left instrument panel lower TRIM - R.R..

Proceed with refitting - 7040A28 TRIM on gearbox control panel - R.R..

Proceed with refitting - 7040A19 cushion padding - r r.

Proceed with refitting - 7040A65 passenger compartment box lock, one, r r.

Proceed with refitting - 7040L37 gear lever plate - r r.

Connect the negative (-) battery terminal.