Coolant temperature sensor - r + r
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Petrol injection system › Coolant temperature sensor - r + r
EngineCoolant temperature sensor - r + r
Coolant temperature sensor - r + r
Removing
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r
1. Disconnect the electrical connection from the engine coolant temperature sensor.
| Name | Connector | |
|---|---|---|
| 1 | Engine temperature sender unit | K36 |
2. Undo and remove the engine coolant temperature sensor.
Refitting
Place the engine coolant temperature sensor back in its housing and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| COOLANT TEMP SENSOR | M16 | 3.1 ÷ 3.7 |
Connect the electrical connection to the engine coolant temperature sensor.
Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r.
Connect the negative (-) battery terminal.
Parts & tools for this job For 2003 Fiat Idea
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.