Throttle body intergral with mds - r r

Operation 1056B15 · Multi-point injection system (mpi)

1.4 16v

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r

1. Disconnect the electrical connection from the throtle body integrated with the M.D.S.

2. Undo the bolts (2a) and move the mounting bracket (2b) aside, complete with injection-ignition system control unit (2c).

3. Undo the remaining bolt (3a) and remove throttle body with integral MDS (3b)

Refitting

Refit the throttle body with integral MDS and secure with a bolt.

Place the mounting bracket, complete with injection-ignition system control unit, back in its housing and secure it using the bolts.

Connect the electrical connection to the throttle body integral with M.D.S.

Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r.

Connect the negative (-) battery terminal.