Intake air pressure/temperature sensor - r r
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Petrol injection system › Intake air pressure/temperature sensor - r r
EngineIntake air pressure/temperature sensor - r r
Intake air pressure/temperature sensor - r r
Removing
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
1. Disconnect the electrical connection from the intake air temperature/pressure sensor.
| Name | Connector | |
|---|---|---|
| 1 | Integrated air temperature sensor | K43 |
2. Undo the bolts (2a) and remove the intake air temperature/pressure sensor (2b).
Refitting
Place the intake air temperature/pressure sensor back in its housing and secure it using the bolts.
Connect the electrical connection to the intake air temperature/pressure sensor.
Connect the negative (-) battery terminal.
Parts & tools for this job For 2003 Fiat Idea
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.