Cam shaft left rigid mount - r r

Operation 1008A46 · Power unit fastenings

1.4 16v

Removing

Proceed with removal - 1008B10 power unit front mount (timing side) flexible block - replace

1. Undo the bolts (1a) and remove the gearbox side rigid power unit support (1b).

1.3 JTD 16v

Removing

Proceed with removal - 7055A43 central front grille - r r

Proceed with removal - 1008B10 power unit front mount (timing side) flexible block - replace

1. Undo the bolts fixing the air conditioning pipe mounting brackets to the timing side rigid engine support.

1.4 16v

Refitting

1. Refit the timing side power unit rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

1.3 JTD 16v

1. Undo the bolts (1a) and remove the timing side rigid engine support (1b) complete with engine lifting bracket (1c).

1.4 16v

Proceed with removal - 1008B10 power unit front mount (timing side) flexible block - replace.

1.3 JTD 16v

Refitting

1. Place the timing side rigid engine support (1a), complete with engine lifting bracket (1b), in position and secure it tightening the bolts (1c) to the recommended torque.

Tighten the bolts fixing the air conditioning pipe mounting brackets to the timing side rigid engine support.

Proceed with refitting - 1008B10 power unit front mount (timing side) flexible block - replace.

Proceed with refitting - 7055A43 central front grille - r r.