Central front grille - r r
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Moulding and protection › Central front grille - r r
‹ Prev Drip channels on door compartment (one), l/h or r/h - r+rNext › Moulding on one pillar, l/h or r/h - r+r
Body fittingsCentral front grille - r r
Central front grille - r r
Removing
Open the bonnet lid.
1. Use the special tool and release the retaining buttons.
| Name | Country | |
|---|---|---|
| 1 | Scraper blade | 1.878.077.000 |
2. Undo the bolts.
3. Remove grille (3a) by undoing internal retainers (3b).
Refitting
Check the grille is undamaged and check the retainers are undamaged and correctly positioned.
Position the grille and secure with bolts.
Engage the retaining buttons.
‹ Prev Drip channels on door compartment (one), l/h or r/h - r+rNext › Moulding on one pillar, l/h or r/h - r+r
Parts & tools for this job For 2003 Fiat Idea
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.