BADGE on tailgate - R.R.

Operation 7055A83 · Exterior mouldings

Removing

1. Using a plastic blade, remove the badge (1a) unsticking the double sided tape (1b) from the perimeter and releasing the centering pins (1c).

Refitting

Check that the badge is undamaged.

1. Clean the badge housing, removing the residual adhesive and degrease with heptane.

2. Remove the protective film (2a) from the double sided tape and place the badge (2b) in position. Do up the retainers (2c) and apply pressure.

Perform the operation at a temperature higher than 20C.