Protective moulding on rear bumper - r r

Make

Fiat

Model

Idea Factory Service Manual

Year

2003–2012

Section

Moulding and protection › Protective moulding on rear bumper - r r

Body fittingsProtective moulding on rear bumper - r r

Protective moulding on rear bumper - r r

Operation 7055B36 · Exterior protections

Removing

1. Position a double layer of body tape (1a) along the entire perimeter of the moulding (1b).

2. Move the moulding (1b) releasing the retainers (2a).

3. Recover the trim.

Refitting

Check that the moulding is not damaged and that the retainers are intact.

Place the moulding in position attaching the retainers.

Remove the protective adhesive tape.

17 Body & interior