Timing system protective cover(s) - r + r

Operation 1032D12 · Timing system protections

1.4 16v

Removing

Position the vehicle on the ramp

Proceed with removal - 4450B04 right front wheel r r

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R.

Proceed with removal - 1008B10 power unit front mount (timing side) flexible block - replace

1. Undo the bolts fixing the power unit timing side rigid support to the flexible mounting.

2. Undo the bolts (2a) and remove the upper protective timing cover (2b).

1. Undo the bolts (1a) and remove the lower protective timing cover (1b).

Refitting

Fit the lower protective timing cover and secure using the bolt.

Fit the upper protective timing gear cover and fix it using the bolts.

Tighten the bolts fixing the power unit rigid support to the recommended torque.

Proceed with refitting - 1008B10 power unit front mount (timing side) flexible block - replace.

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

Remove the car from the ramps.