Toothed drive pulley - r + r with timing belt removed
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Timing system › Toothed drive pulley - r + r with timing belt removed
Toothed drive pulley - r + r with timing belt removed
Removing
1. Remove the flywheel housing protective plug.
2. Unscrew the bolt securing the flywheel protective case.
1. Fit the flywheel lock (1a) and fix it using the bolt (1b) removed previously.
| Name | Country | |
|---|---|---|
| 1a | Flywheel lock | 1.871.000.400 |
1. Fit the tool.
Although the flywheel lock has been inserted, this operation is necessary to lock the pulley to prevent it twisting during bolt loosening/itghtening and causing damage to the internal locating dowel.
| Name | Country | |
|---|---|---|
| 1 | Counter-torque | 1.870.763.000 |
2. Undo the bolt fixing the toothed drive pulley.
Remove the tool.
| Name | Country | |
|---|---|---|
| Counter-torque | 1.870.763.000 |
3. Remove the toothed drive pulley.
Refitting
1. Place the drive pulley back in its housing.
2. Fit the tool.
| Name | Country | |
|---|---|---|
| 2 | Counter-torque | 1.870.763.000 |
3. Tighten the bolt fixing the toothed drive pulley to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 3 | Bolt | TOOTHED DRIVE PULLEY | M12 | 1.9 ÷ 2.1 + 90? |
Remove the tool.
| Name | Country | |
|---|---|---|
| Counter-torque | 1.870.763.000 |
Undo the bolt and remove the flywheel locking tool.
Tighten the flywheel protective casing retaining bolt.
Refit the protective plug to the flywheel protective casing.
Parts & tools for this job For 2003 Fiat Idea
- PARTTiming belt kitSearch: Fiat Idea 2003 timing belt kit
- TOOLEngine timing tool setSearch: Fiat engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.