Fuel system (page 2 of 3)
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (2000 range)
00 Introduction and technical dataFuel system · page 2 of 3
| INTEGRATED INJECTION SYSTEM COMPONENTS | |
|---|---|
| Electronic control unit | M. Marelli IAW 59F |
| Throttle case | M. Marelli 36SXFE1 |
| Intake air temperature and pressure sensor | M. Marelli T-PRT 05 |
| Throttle valve position sensor | M. Marelli IPF 2C |
| Fuel manifold | M. Marelli CB 196 |
| Injectors | M. Marelli IWP 116 |
| Idle speed actuator | M. Marelli IB 01 |
| Timing sensor | Bosch PG 3.5 |
| Engine coolant temperature sensor | Sylea 402.246.02 |
| T.D.C. sensor | Sylea CWM 02 |
| Lambda sensors 1 and 2 | NTK OZA 532 |
| Ignition coil | CHAMPION BAE 800 B |
| Spark plugs | NGK BKR5EZ CHAMPION RC10YCC |
| Fuel pump | MARWALL TTP359 |
| Detonation sensor | NTK KNE 11 |
| Injection system main relay | Bitron |
| Fuel vapour recirculation solenoid valve | M.Marelli EC 2 |
Parts & tools for this job For 1986 Fiat Panda
- PARTFuel filterSearch: Fiat Panda 1986 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.