Rear seat BACKREST locking/release CABLE - R.R.

Operation 7050A74 · Rear seat assembly

Removing

- 7040H80 parcel rack

- 7050C05 Single sliding REAR SEAT with split folding squab - R.R.

- 7050C11 Single CUSHION of sliding rear seat - S.R.

1. Undo the bolts (1a) fixing the movement handles (1b).

1. Lift up the folding control handle and disconnect the cable from the actual handle.

1. Disconnect the return spring from the folding locking/release cable.

Working on the folding control from the luggage compartment, fold the backrest over.

1. Undo the fixing bolts (1a) and remove the centre joint cover (1b) for one of the split backrests.

1. Partly lift up the folding backrest cover and upholstery until access can be gained to the folding locking/release cable.

2. Disconnect the backrest cable at the points shown.

3. Release the backrest folding locking/release cable and remove it.

Refitting

Fit the backrest folding locking/release cable.

Connect the folding locking/release cable to the backrest.

Place the folding backrest cover and upholstery back in its original position.

Fit the centre joint cover for the split backrest and tighten the fixing bolts.

Connect the return spring to the folding locking/release cable.

Lift up the folding control handle and connect the cable to the actual handle.

Position the seat moving control handles in the housing on the cushion frame and tighten the fixing bolts.

Check the operation of the folding device.

- 7050C11 Single CUSHION of sliding rear seat - S.R.

- 7050C05 Single sliding REAR SEAT with split folding squab - R.R.

- 7040H80 parcel rack