Split, (two seater), BACKREST COVER - Replacement

Operation 7050A53 · Rear seat assembly

Removing

1. Using a suitable tool, press the bush retaining tooth (1a) and remove both bushes (1b) pushing them upwards.

Take great care not to damage the backrest cover.

1. Using the knife, release the cover (1a) from the backrest frame (1b) along the entire perimeter.

1. Remove the split rear seat backrest frame.

Refitting

Fit the split rear seat backrest frame on the cover complete with upholstery.

Fit the edge of the cover on the perimeter of the frame.

Check that the fabric is taut and that there are no creases.

Fit the guide bushes for the head restraint positioning them in the housing in the frame.

Push them downwards until they are in contact with the actual backrest frame.

Check that they do not slip out of the housing when pulled.