Rear seat squab panel - r + r

Operation 7050A58 · Rear seat assembly

Removing

- 7040H80 parcel rack

Lower the rear seat backrest.

1. Undo the upper bolt fixing the rear side panel cover.

Lift up the rear side panel cover until it is possible to gain access to the blts fixing the backrest striker.

2. Undo the retaining bolts.

3. Remove the rear seat backrest striker.

Refitting

Fit the backrest striker in the housing and tighten the fixing bolts.

Lift up the backrest once or twice, placing it in the locked position on the striker.

Check that the seat locks and releases correctly.

1. The striker can be adjusted through the inner opening which is slotted and can be adjusted in the directions shown by the arrows.

Tighten the bolts fixing the striker to the bodyshell to torque.

Tighten the bolt fixing the side panel cover.

Lift up the seat backrest.

- 7040H80 parcel rack