Steering angle sensor not calibrated error

Fault diagnosisSteering angle sensor not calibrated error

STEERING ANGLE SENSOR NOT CALIBRATED ERROR

The diagnostic equipment signals the following error: "C1417 - Steering Angle Sensor not calibrated"

This error is signalled if the calibration of the steering angle sensor has not be carried out. The sensor is incorporated in the electric steering

1	RECALIBRATING THE STEERING ANGLE USING A DIAGNOSTIC TESTER	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and, in the ACTIVE DIAGNOSIS mode, carry out the STEERING ANGLE CALIBRATION, making sure of a successful outcome.	Move on to Step 2 1	The outcome of the procedure is not positive	Replace the steering angle sensor Op. 3350E20 STEERING ANGLE SENSOR R R
2	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Clear the errors using the Examiner Carry out a road test See Test 3350EB STEERING ANGLE SENSOR OPERATION CHECK to ensure that the control unit checks whether there are any errors still present. Return to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis

RECALIBRATING THE STEERING ANGLE USING A DIAGNOSTIC TESTER

All OK

Problems encountered

Operation

Connect the diagnostic equipment and, in the ACTIVE DIAGNOSIS mode, carry out the STEERING ANGLE CALIBRATION, making sure of a successful outcome.

Move on to Step 2 1

The outcome of the procedure is not positive

Replace the steering angle sensor

Op. 3350E20 STEERING ANGLE SENSOR R R

CHECK ON CORRECT OPERATION

All OK

Problems encountered

Operation

Clear the errors using the Examiner

Carry out a road test

to ensure that the control unit checks whether there are any errors still present.

Return to the workshop and check that the fault is no longer present using the diagnostic equipment

End of diagnosis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.