Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

B - intake and turbocharging circuit

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Fuel system (1372 T) › B - intake and turbocharging circuit
10 EngineB - intake and turbocharging circuit

B - INTAKE AND TURBOCHARGING CIRCUIT

This consists of the following main components

  1. Hot wire air meter (debimeter);
  2. Throttle case;
  3. Engine idle speed actuator;
  4. Three-way turbocharging control solenoid;
  5. Turbo by-pass valve;
  6. Intercooler (intercooler);
  7. Turbo regulation actuator (Waste-gate);
  8. Turbocharger;
  9. Air cleaner;
  10. Intake air temperature sensor;
  11. Absolute pressure sensor or barometric capsule.

Two sensors are also present; inlet air temperature sensor (10), absolute pressure sensor or baro-metric capsule (11). Despite being included in the electric/electronic circuit, these are responsible for controlling turbocharging.

AIR INTAKE CIRCUIT DIAGRAM

Diagram of the engine intake and turbocharging circuit showing components numbered 1 through 11, including the air cleaner, intercooler, throttle case, turbocharger, and various sensors and actuators connected by compressed and intake air circuits.

Compressed air circuit

Intake air circuit

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.