Components of fuel pump assembly

Components of fuel pump assembly

1. Retaining plate
2. Electric fuel pump
3. Mesh prefilter
4. Delivery line
5. Return line
6. Gasket
7. Fuel level gauge sender unit

REMOVING-REFITTING FUEL FILTER

• Raise the vehicle and then remove the screw retaining the filter to the clip
• Unscrew fuel inlet and outlet fittings from filter
• Collect fuel emerging during the operation in a suitable container
• Clean parts thoroughly before refitting a new filter

The fuel filter must be replaced at intervals of 30,000 km.

NOTE The arrow stamped on the outer case indicates the fuel flow direction and therefore the correct installation direction.
Whenever the filter is replaced, replace the seals, start the engine and check for leaks from the seals.

Fitting tightening torque: 3-3.8 da Nm.