Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting (page 10 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1372 T)
10 EngineRemoving-refitting · page 10 of 10
Two views of the central mount area showing bolts and hydraulic jack support points
Central gearbox mount component

P3M13CJ03

  • loosen the central mount bolts from the body (left hand box);
  • support the power unit temporarily with a hydraulic jack;
  • remove the central gearbox mount after unscrewing the bolts (right hand box);
Two views of the power unit front mounts showing retaining bolts on left-hand and right-hand sides
  • unscrew the power unit left front mount retaining bolts (left-hand box);
  • unscrew the bolts retaining the power unit right front mount (right hand box);
Power unit being removed from the engine bay using a boom and placed on a platform below
  • remove the power unit from the engine bay by manoeuvring the boom and place on the platform below;

The assistance of a second operator is required.

Original page

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.