Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting (page 9 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1372 T)
10 EngineRemoving-refitting · page 9 of 10
View of the half-axle being pried out from the wheel hub assembly

P3M12CJ01

  • prise out the half-axles and fasten to the damper;
Vehicle lifted with a boom and universal hook 1860592000 attached to power unit support brackets

P3M12CJ02

  • lower the vehicle to the ground;
  • position universal hook 1860592000, applied to a boom, in the power unit support brackets;
  • adjust boom to take up slack in power unit support cables;

NOTE The figure below shows the location of the hooks in the power unit support brackets.

Power unit support bracket on the left side showing the hook attachment point
Illustrates engine valve adjustment procedure with tools
Power unit support bracket on the right side showing the hook attachment point

P3M12CJ03

P3M12CJ04

P3M12CJ05

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.