Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting (page 5 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1372 T)
10 EngineRemoving-refitting · page 5 of 10
View of the engine bay showing the crankshaft pulley protection area with arrows indicating bolt locations
- unscrew the bolts indicated and remove the crankshaft pulley protection;
The removed black plastic crankshaft pulley protection cover
View of the turbocharger area with arrows pointing to the air inlet duct connections
- remove the air inlet duct to the turbo after loosening the clips and unscrewing the bolt shown in the figure;
The removed curved black rubber air inlet duct for the turbo
View of the engine inlet manifold area with arrows indicating the air intake duct connections
- remove the air intake duct to the inlet manifold after loosening the clip and unscrewing the bolts shown;
The removed black rubber air intake duct for the inlet manifold

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.