Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)04 · 21 Gearbox and differential
04 · Transmission

Sectional view (page 3 of 3)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Automatic transmission (Selecta)
21 Gearbox and differentialSectional view · page 3 of 3

The system consists of an electromagnetic clutch and a control unit, which picks up the signals shown in the figure below.

Schematic diagram of the electromagnetic clutch system showing components including coil, vehicle speed sensor, ECVT control unit, accelerator pedal switch, battery, and various signal lines connecting to the injection/ignition control unit.
  1. Coil
  2. Signal from vehicle speed sensor
  3. Vehicle speed sensor
  4. Electromagnetic powder
  5. Drive shaft (from engine)
  6. Input shaft to the transmission
  7. ECVT control unit
  8. Accelerator pedal switch
  9. Throttle valve opening position potentiometer
  10. Multifunction switch
  11. Ignition switch
  12. Air conditioning signal
  13. Engine RPM signal
  14. Accelerator pedal
  15. Water temperature signal
  16. Injection/ignition control unit
  17. Battery

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.