Cleaner 134 (page 3 of 3)

Detail of top inclined panel

1. Moisture indicator
2. Function selector
3. Function switch
4. Compressor forcing button and "LOCK" warning light"
5. "PUMP" warning light"
6. "LEVELS" warning light"
7. Device activated "ON" warning light"
8. Low pressure end pressure gauge
9. Low pressure cock"
10. Fitting for low pressure end hose
11. "VAC" cock"
12. Liquid gauge
13. "REF" cock"
14. High pressure end hose fitting
15. Fitting for connecting vehicle system oil filling device
16. High pressure cock"
17. High pressure end pressure gauge.
18. Low pressure end hose
19. High pressure end hose

The semi-automatic Cleaner 134 device is equipped with 4 filters; one anti-acid and the other dehydrating, including a safety filter. The absorption capacity of the first filtering station (filter F1) at 25°C is about 27 grams whereas the capacity of the second station (filters F2 and F3) is about 105 grams. The dispensing cylinder has a capacity of 4Kg and is heated by a coil, connected in turn to a device for automatic temperature control (thermostat). A safety valve on the top part of the dispensing cylinder behind the pressure gauge is used to drain off uncondensed gas. Indicator (1) changes colour to show the level of moisture present in the liquid coolant after flowing through the first three filters. Percentage moisture levels as a function of temperature corresponding to the three different colours are indicated in the table given on the following page. The maximum acceptable moisture level in the coolant is 15 parts per million.