Preparing the spare part

Preparing the spare part

• Remove the anti-corrosion protective treatment along the entire internal and external perimeter of the replacement part using a disc grinder;

• apply the galvanizing protective paint to the areas which have previously been ground:

NOTE Use IVI Epox type epoxide primer or a galvanizing protective paint or an equivalent product.

• trace the reference points for the roof rack mountings;

Front attachment

Distance A = 275 mm
(Distance from the front attachment to the upper projection on the front edge of the replacement part).

Rear attachment

Distance B = 620 mm
(Distance from the front attachment to the rear one).

• weld the front and rear roof rack attachments in position (see inset).