Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Replacing front wing

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Replacing body panels › Replacing front wing
70 BodyworkReplacing front wing

REPLACING FRONT WING

View of the front wheel arch area showing the location of bolts on the wheel arch liner and surrounding components.

Removing-refitting wheel arch liner

  • Undo the bolts fixing the wheel arch liner to the bodyshell and bumpers;
View of the lower side of the vehicle showing the wheel arch liner, under door cover, and rear mounting points.
  • separate the wheel arch liner from the under door cover;
  • undo the rear bolts fixing it to the bodyshell, then remove the wheel arch liner.
Close-up view of the upper section of the under door cover near the door opening.
The removed under door cover panel shown as a separate long component.
View of the lower edge of the under door cover with arrows indicating the retaining springs and bolt locations.

Removing-refitting under door cover

  • Undo the bolts fixing the under door cover to the bodyshell;
  • extract the under door cover from the retaining springs and rmeove it from the vehicle.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.