1016a - tappet covers overview (page 2 of 2)

(Cont. Op. 1016A22)

• Raise the car.

1. Disconnect the lower engine coolant outlet sleeve from the radiator and drain the coolant into a suitable container.

• Connect the lower engine coolant outlet sleeve to the radiator.
• Lower the car.

1. Release the air filter cover fastening clasps.
2. Unscrew the throttle case air conveyor screws.
3. Take out the oil vapours recovery pipe from the tappet cover.
4. Take out the oil vapours recovery pipe from the throttle case.

1. Remove the air filter cover with the pipes and throttle case air conveyor.

1. Disconnect the idle regulator actuator electrical connection

2. Electrically disconnect the throttle position sensor

3. Disconnect the intake air temperature sensor electrical connection

4. Disconnect the single injector(SPI)electrical connection

(Cont.)