Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

1. Electrically disconnect the ignition coil

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Cylinder head (899) › 1. Electrically disconnect the ignition coil
10 Engine1. Electrically disconnect the ignition coil

(Cont. Op. 1016A22)

1. Electrically disconnect the ignition coil

NameConnector
1aIgnition coil N° 1 (cyl. 1-4) A30A30
1bIgnition coil N° 2 (cyl. 2-3) A30A30
Diagram showing electrical connectors labeled 1a and 1b on the engine throttle assembly
  1. Take out the coolant pipe from the throttle case.
Diagram showing a hose connection labeled 1 on the throttle case assembly
  1. Disconnect the accelerator control hose from the throttle case.
Diagram showing fuel pipes connected to the throttle case, with one pipe labeled 1
  1. Take out the fuel recycling pipe from the throttle case.
  2. Take out the fuel inlet pipe from the throttle case.

Plug the fuel pipes as soon as they have been taken out, to avoid fuel spillage.

Diagram showing sensor pipes connected to the throttle assembly, labeled 1 and 2
  1. Take out the absolute pressure sensor pipe.
  2. Take out the vacuum intake pipe of the fuel vapours cut off solenoid valve.

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.