List of operations (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Cylinder head (899)
10 EngineList of operations · page 2 of 2
(Cont. Op. 1016C10)
- Electrically disconnect the engine coolant temperature sender
| Name | Connector | |
|---|---|---|
| 1 | Engine coolant temperature sender | K35 |
- Disconnect the earth cable on the engine.
| Name | Connector | |
|---|---|---|
| 1 | Earth on engine | C40 |
- Electrically disconnect the engine temperature sensor
| Name | Connector | |
|---|---|---|
| 2 | Engine temperature sensor | K45 |
- Unscrew the nut (1a) fastening the engine oil rod (1b).
- Take out the hot air intake sleeve from the exhaust manifold.
Raise the car.
- Unscrew the nuts securing the exhaust pipe to the manifold.
(Cont.)
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.